What are the forms of punched products during stamping processing?

Stamping processing, a widely used technology in the field of metal processing, uses molds and pressure to plastically deform or shear metal materials to obtain the desired product shape. During the blanking process, the product takes on a variety of forms, depending mainly on the design of the die and the optimization of the process parameters.

Flat washers and gaskets are one of the most common forms used in blanking. These products usually require materials with uniform thickness and smooth edges, and are used in mechanical devices to reduce friction and disperse pressure. In their production, attention should be paid to the flatness of the material and the precise coordination of the mold to ensure the consistency of the product size and surface finish.

Next is the connectors category of products, such as rivets, self-tapping screws and so on. These products usually require high strength and good fastening effect. In the blanking process, in addition to ensuring the mechanical properties of the material itself, it is also necessary to ensure the accuracy of the mold so that the finished product can meet the strict dimensional tolerances.

Precision electronic parts are also an important application area for blanking. The high demands placed on the accuracy and surface quality of these products necessitate the use of high-quality materials in the production process, as well as a high degree of precision in the design and manufacture of the molds. By finely adjusting the speed, force and other parameters of the press slide, it is possible to obtain parts that meet the stringent standards of the electronics industry.

Special-purpose mesh panels and sieve products require materials with good permeability and a certain load-bearing capacity. When punching, special attention needs to be paid to the size of the aperture and its uniformity of distribution. Since these products are often used for screening and filtration, the design and arrangement of the holes have a direct impact on the functional performance of the final product.

In the stamping process, you will also see a variety of decorative items and handicrafts. These products are often in pursuit of a unique shape and exquisite texture, so when punching not only to consider the choice of materials and processing, but also focus on the artistic design of the mold. The production process of these products combines technology and aesthetics, demonstrating the diversity and creativity of the blanking process.